Scanlab RTC 5 PC Interface Board - Page 164

RTC
®
5 PC Interface Board
Rev. 1.9 e
8 Advanced Functions for Scan Head and Laser Control
164
innovators for industry
Notes for RTC
®
4 Users:
• For loading RTC
®
5 correction tables via
load_correction_file, transformation of the
correction tables is not settable.
• For the RTC
®
5, coordinate transformations can
be separately defined for the primary and
secondary scan head connectors. This fulfills the
same purpose as the transformations defined via
the RTC
®
4’s load_correction_file command.
•The RTC
®
5 consequently first executes coordinate
transformations after microvectorization, but
directly before image field correction (with corre-
sponding consequences for the effective jump or
marking speed, as previously mentioned).
•The RTC
®
5 does not support the RTC
®
4’s
coordinate transformations (collectively for both
scan heads) before microvectorization.