Scanlab RTC 5 PC Interface Board - 5.8 Upgrading RTC5 Boards

RTC
®
5 PC Interface Board
Rev. 1.9 e
5 Installation And Start-Up
60
innovators for industry
5.8 Upgrading RTC
®
5 Boards
If you replace an already installed RTC
®
5 board with
a newer one, then you must also perform a software
update. This is particularly important when RTC
®
5
boards with DSP version 0 get replaced by RTC
®
5
boards with DSP version 2 (see get_rtc_version bits
#16-23). The delivered product CD has the latest
versions of software files. You can also download the
newest files from SCANLAB’s website.