Scanlab RTC 5 PC Interface Board - get_time

RTC
®
5 PC Interface Board
Rev. 1.9 e
10 Commands And Functions
286
innovators for industry
Ctrl Command get_time
Function returns the RTC
®
5 timer value stored during the most recent call of
save_and_restart_timer
Call TimerValue = get_time()
Result RTC
®
5 timer value in seconds as a 64-bit IEEE floating point value
Comments • See save_and_restart_timer.
RTC
®
4  RTC
®
5 unchanged
References save_and_restart_timer