RTC
®
5 PC Interface Board
Rev. 1.9 e
14 Technical Specifications of the RTC
®
5 PC Interface Board
573
14.1 Compliance with EC Guide-
lines for Electromagnetic
Compatibility (EMC)
The RTC
®
5 PC interface board has been determined
to be in compliance with EC directive 2004/108/EC
(electromagnetic compatibility).
For that purpose, an RTC
®
5 PC interface board has
been integrated to a PC and was tested together with
a hurrySCAN
®
25 scan head (with SL2-100 interface).
Test Specifications
Evidence of fulfillment of the protection goals of
EC directive 2004/108/EG (CE Conformity for
EMC) based on
– EN 61000-6-2: 2005
– EN 61000-6-4: 2007
Result
The devices under test fulfill the specifications.
14.2 Compliance with FCC Rules
The RTC
®
5 PC interface board has been tested and
found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable
protection against harmful interference when the
RTC
®
5 board is operated in a commercial envi-
ronment. The RTC
®
5 board generates, uses, and can
radiate radio frequency energy and, if not installed
and used in accordance with this instruction manual,
may cause harmful interference to radio communica-
tions. Operation of the RTC
®
5 board in a residential
area is likely to cause harmful interference in which
case the user will be required to correct the inter-
ference at his own expense.
To Next Page
Loading...