Scanlab RTC 5 PC Interface Board - 15.4 Technical Specifications of RTC5PC;104-Plus Board

RTC
®
5 PC Interface Board
Rev. 1.9 e
15 Appendix A: The RTC
®
5 PC/104-Plus Board
590
innovators for industry
15.4 Technical Specifications of
RTC
®
5 PC/104-Plus Board
System Requirements
PC/104-Plus CPU board
+ free position in the PC/104 stack
Operating system Microsoft (32 bit or 64 bit)
WINDOWS 8,
WINDOWS 7,
WINDOWS Vista and
WINDOWS XP (SP2 or
higher) and
WINDOWS XP Embedded
(SP2 or higher)
Dimensions
Length x Width 96 mm x 93.5 mm
Stack height 16.8 mm
Max. component
height
9.3 mm
Weight
approx. 115 g
Operating and Storage Conditions
Operating
temperature
+15 °C to +60 °C
Storage temperature – 20 °C to +60 °C
Environmental
conditions
non-condensing
non-corrosive
Connectors to PC/104-Plus CPU board (or to
PC/104-Stack)
PC/104-Plus PCI bus 120-pin stack-trough
connectors incl. shroud,
operating voltage: +5 V
ISA bus 104-pin stack-through
connectors incl. socket for
passing through the
signals and +5 V power
supply
Other connectors (signal specifications
identical to RTC
®
5 PC interface board)
Interface to
scan system
SCANHEADS connector
(20-pin box header) with
primary and secondary
scan head connection
(secondary scan head
control is only optionally
activated)
Interfaces for laser and
peripheral equipment
LASER connector (16-pin
box header)
MULTI multifunction
connector (100-pin box
header)