A.9
Date Code 20150130 Instruction Manual SEL-787 Relay
Firmware and Manual Versions
ICD File
➤ Added new
RMS1MMXU2,
RMS2MMXU3, and
METMHAI1 Logical
Nodes and attributes to
MET LDevice.
➤ Added new
PROGGIO24,
LBGGIO25,
MBOKGGIO26, and
MISCGGIO27 Logical
Nodes and attributes to
ANN LDevice.
➤ Modified data types for
MaxA1, MaxA2, MinA1,
MinA2, MaxA, MinA,
MaxPhV, MinPhV,
MaxP2PV, and MinP2PV
attributes in
METMSTA1 Logical
Node.
➤ Modified data types for
DmdA and PkDmdA
attributes in
METMDST1 Logical
Node.
ICD-787-R302-V0-
Z000000-D20120404
➤ Added Serial and Model
Number attributes to
PhyNam DO.
R207 and higher 004
a
787 R207 and
above
1.1.145.0
and higher
20111107
ICD-787-R300-V0-
Z000000-D20110623
➤ Remove UTC offset
attribute.
➤ Improved IEC 61850
conformance.
➤ Correct DmdVArh data
source in METMDST1
Logical Node.
R206 and higher 004
a
787 R206 1.1.115.0
and higher
20110610
ICD-787-R200-V0-
Z000000-D20100716
➤ Added select before
operate (SBO) and
enhanced security SBO
modes to 61850 MMS.
R104 and higher
R203 and higher
003
b
Enhanced Con-
trols R104/
R203 and above
1.1.93.0
and higher
20100730
ICD-787-R100-V0-
Z002001-D20080507
➤ Initial ICD File Release. R100-R103
R200 – R202
002 1.1.73.0
and higher
20080407
a
ICD files with ClassFileVersion 004 require R2xx series firmware and do not work with R1xx firmware.
b
ICD files with ClassFileVersion 003 can be used with R2xx series firmware with 61850 device library 004 also. Architect will
convert the ICD file to ClassFileVersion 004 and send to the relay.
Table A.5 SEL-787 ICD File Revision History
configVersion Summary of Revision
Relay
Firmware
Compatibility
ClassFile
Version
ACSELERATOR
Architect File
Description
Architect
Software
Version
Manual
Date
Code
To Next Page
Loading...
