VISOR
®
Communications manual
2.5 Access to VISOR
®
through network
Exemplary values for IP, etc.
Access to VISOR
®
1 from PC 1 if on the same subnet
l Via SensoFind (/find)
Access to VISOR
®
2 from PC 1 if on a different subnet
Only if:
l Gateway is set correctly in Sensor 2 (here to 192.168.30.1) - and
l in SensoFind via Add IP, the sensor IP of Sensor 2 is set correctly
˃ After this, VISOR
®
2 will also appear in the "Active sensors" list in SensoFind!
06814859 - 1/24/2019-00 Page 11 EN
To Next Page
