Sensopart Visor - Reset Statistic (ASCII); Serial Communication ASCII

VISOR
®
Communications manual
11.1.4 Serial communication ASCII
Reset statistic (ASCII)
Telegrams: Availability and supported interfaces (Page 85)
Overview telegrams (Page 81)
Reset statistics (ASCII) request string to sensor
Byte no. Content Meaning
1 R
Reset Statistics2 S
3 T
Example: RST
Reset statistics (ASCII) response string from sensor
Byte no. Content Meaning
1 R
Reset Statistics2 S
3 T
4
P
F
P successful (Pass)
F Fail
Example: RSTP
Additional information:
Accepted in run mode: Yes
Accepted in config mode: No
Accepted when Ready is low: Yes
Status of Ready signal during
processing:
No change
Supported interfaces:
Telegrams: Availability and supported interfaces
06814859 - 1/24/2019-00 Page 90 EN