Sensopart Visor - Backup Creation; 5 Service; Visualization

VISOR
®
Communications manual
5 Service / Visualization
There is a service port (Ethernet TCP/IP port 1998) available for the VISOR
®
vision sensor. This
port will be available regardless of how you configure the various steps.
5.1 Backup creation
The following telegrams can be used for automatic backups and restores
l Read job set (ASCII)
The "Import job set" telegram can be used to change the VISOR
®
vision sensor’s job set.
The job set file must first be loaded onto the VISOR
®
.
l Save job set (ASCII)
The "Back up job set" telegram can be used to read the VISOR
®
vision sensor’s job set.
5.2 Visualization
The VISOR
®
vision sensor provides all data through the service port so that applications can be
visualized.
Additional information: Update visualization data (ASCII) (Page 161)
06814859 - 1/24/2019-00 Page 30 EN