Sensopart Visor - Read Trigger Delay (ASCII)

VISOR
®
Communications manual
Read trigger delay (ASCII)
Telegrams: Availability and supported interfaces (Page 85)
Overview telegrams (Page 81)
Read trigger delay V1 (ASCII) request string to sensor
Byte no. Content Meaning
1 G
Get Trigger Delay2 T
3 D
4 1 Request version
Example: GTD1
Read trigger delay V1 (ASCII) response string from sensor
Byte no. Content Meaning
1 G
Get Trigger Delay2 T
3 D
4
P
F
P successful (Pass)
F Fail
5 - 7 X Error code
8 - 15 X
Trigger delay
in msec (max. 3000 msec)
in encoder steps (max. 65535 steps)
Example: GTDP00000001000
Additional information:
Accepted in run mode: Yes
Accepted in config mode: No
Accepted when Ready is low: Yes
Status of Ready signal during
processing:
No change
06814859 - 1/24/2019-00 Page 136 EN