EasyManua.ls Logo

Sensopart Visor User Manual

Sensopart Visor
263 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Sensopart Visor and is the answer not in the manual?

Sensopart Visor Specifications

General IconGeneral
BrandSensopart
ModelVisor
CategoryAccessories
LanguageEnglish

Summary

2 Network connection

3 VISOR® configuration

Settings in SensoFind

Outlines the steps for configuring settings within the SensoFind software.

4 Ethernet TCP/IP, port 2005 / 2006

4.1 Example: Data output from VISOR® to PC / PLC

Demonstrates how to configure data output from VISOR® to PC or PLC.

4.2 Example: Commands (requests) from PC / PLC to VISOR®

4.3 Example: Job change from PC / PLC to VISOR®

6 VISOR® telegrams for PROFINET and EtherNet/IP

6.1 Module 1: "Control" (from controller to VISOR®)

Details the 'Control' module telegrams sent from controller to VISOR®.

6.2 Module 2: "Status" (from VISOR® to controller)

Details the 'Status' module telegrams sent from VISOR® to controller.

6.3 Module 3: "Data" (from VISOR® to controller)

Details the 'Data' module telegrams sent from VISOR® to controller.

6.4 Module 4: "Request" (from controller to VISOR®)

Details the 'Request' module telegrams sent from controller to VISOR®.

6.5 Module 5: "Response" (from controller to VISOR®)

Details the 'Response' module telegrams sent from controller to VISOR®.

8 Request sequences

9 PROFINET

9.1 Siemens S7-1200 TIA 12 configuration example

Provides an example configuration for Siemens S7-1200 using TIA 12.

10 EtherNet/IP

10.1 Rockwell CompactLogixTM configuration example

Configuration example for data transfers using Rockwell CompactLogixTM.

10.2 Rockwell Studio 5000 configuration example

Configuration example for Rockwell Studio 5000 software.

11 Appendix

11.1.1 Overview telegrams

Provides an overview of various telegrams for VISOR® control and job settings.

11.1.3 Error codes

Lists and explains error codes encountered during operation.

Related product manuals