Sensopart Visor - Page 255

VISOR
®
Communications manual
Identification
Value Description
Length
Binary
[Byte]
Data
type
Available
for
String
length
Length of read code
[bytes]
4
Signed
integer
String
Contents of read code.
Depending on the code, the string length may
vary. If a fixed string length is desired, the
minimum string length (detector-specific user
data) and the maximum string length (detector
settings) must be set to the same value (e.g.
127).
n String
String
comparison
Content check for the read information. The
contents of the read information are checked
using regular expressions (Reiter
Referenzstring)
1 Boolean
Truncated
Code complete or truncated
F = Code complete
P = Code truncated
1 Boolean
Page 255 EN 06814859 - 1/24/2019-00