VISOR
®
Communications manual
Fig. 41: Output protocol in Excel representation
For a description of the format of the PROFINET Data module, please refer to Module 3: "Data"
(from VISOR® to controller) (Page 34)
Step 5) The result is the following assignment between the input data of the PLC
Fig. 42: Input data PLC
... and the configured protocol:
Fig. 43: In the vision sensor configured protocol
Conversion of binary values
All detector-specific payloads with decimal places will be transmitted as integers multiplied by
1000, and accordingly must be divided by 1000 after the data is received. The values are
06814859 - 1/24/2019-00 Page 59 EN
To Next Page
Loading...
