Chapter 4 ā Configuring the Library Backing Up the Library Configuration
December 2019 User GuideāSpectra T200, T380, and T680 Libraries
145
User Privilege Requirements Only a user with superuser or administrator
privileges can create a manual backup of the library configuration. See
Configuring Library Users on page 96 for information about the three
types of user groups and what types of privileges each has.
Back Up the Library Configuration
1. Log into the library as a user with superuser or administrator
privileges.
2. If you want to save the configuration to a USB device, connect the
device to a USB port on the LCM and allow time for the device to
mount before continuing.
Note: The save library configuration to USB option is only available if
you connect a USB device to the LCM before you access the
utilities screen (see Connect a USB Device to the Library on
page 176).
3. Select Maintenance > Tools > Utilities. The Utilities screen displays a
list of Basic Utilities.
Figure 71 The Utilities screen.
To Next Page
Loading...
