Chapter 5 — Operating the Library Monitoring Your Library
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
168
2. Select Configuration > DLM (or Drives if DLM is not enabled) to display
the Drives screen. This screen lists all of the drives in the library, along
with basic information about each drive and the available operations
for each drive.
Note: The operations available for each drive depend on how you are
accessing the BlueScale user interface and whether or not:
DLM is enabled
The drive is configured in a partition
Auto Drive Clean is enabled for the partition
3. Click Detail next to the drive for which you want to view detailed
information. The Drive Details screen displays.
Figure 93 The Drives screen.
Figure 94 The Drive Details screen.
To Next Page
Loading...
