Spectra T200 - Page 172

Chapter 5 — Operating the Library Monitoring Your Library
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
173
Using the White BlueScale Vision Camera
Select View Video on the start page to see the camera’s view of the library’s
interior.
The buttons on the screen let you control the motion of the camera lens.
Note: There may be a short delay after you click on the icon for the
desired motion. Wait a couple of seconds for the camera to
respond instead of clicking again.
Read the BlueScale Vision Camera User Guide for detailed information about
configuring and using the BlueScale Vision camera. This guide also
describes installing and using the camera’s Viewing/Recording Utility.
Figure 100 The interior of the library as viewed by the
BlueScale Vision camera.
Button Function
Moves the camera lens through the Preset positions in the
sequence defined by the Camera Administrator.
Pans the camera lens from left to right.
Moves the camera lens to the Motion Detection Preset position.
Points the camera lens to the position corresponding to the arrow
on the button.