Chapter 5 — Operating the Library Monitoring Your Library
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
174
Using the Black BlueScale Vision Camera
The screen displays the camera’s view of the library’s interior.
The buttons on the screen let you control the viewing area. The following
table describes the most commonly used buttons.
Note: There may be a short delay after you click on the icon for the
desired change. Wait a couple of seconds for the camera to
respond instead of clicking again.
Read the Vivotek FD8361 Fixed Dome Network Camera User’s Manual for
detailed information about the remaining buttons and configuring and
using the BlueScale Vision camera.
Figure 101 The interior of the library as viewed by the
BlueScale Vision camera.
Button Function
Moves the camera view of a zoomed image in the direction
corresponding to the arrow on the button. These button only operate
after the camera view is zoomed in. Click the home button in the
center of the position arrows to return to the default view.
Zooms in and out. Click the home button, in the center of the
position arrows, to return to the default view.
Captures and saves still images. The captured images are
displayed in a pop-up window.
Starts recording a video clip to your computer in MP4 file format.
Ends recording.
To Next Page
Loading...
