Chapter 6 — Configuring and Managing Partitions Confirming and Saving the Partition Settings
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
210
5. Click Save. The library requires several minutes to create the partition,
after which the Shared Library Services screen redisplays with the
partition you just created added to the list of partitions.
Notes: If you assigned a cleaning partition to the storage partition,
the partition icon changes as shown in Figure 127.
When you save the partition, the library automatically
generates a configuration backup file and saves it to the
memory card in the LCM. This backup file contains the
library configuration, the MLM and DLM databases, and any
BlueScale encryption keys that are currently stored in the
library.
If you configured the email option for the automatically
generated backup file, the library sends an email with the
backup file attached to the specified recipient (see Enable
Email for the Auto Configuration Save File on page 117).
6. To configure another storage partition, repeat the entire configuration
process, beginning with Creating a Storage Partition on page 187.
To configure another cleaning partition, repeat the entire configuration
process, beginning with Creating a Cleaning Partition on page 185.
Figure 127 The Shared Library Services showing a cleaning
partition and storage partitions.
To Next Page
Loading...
