Chapter 11 — Configuring and Using AutoSupport Configuring AutoSupport
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
328
4. Click Next. The System and Mail Information screen displays.
Enter information about your library’s operating environment and
storage management software in the fields provided.
Select AutoSend Profile to use the current profile as the recipient for
critical alarm log sets automatically sent by the library.
Note: Only one profile can be configured as the AutoSend
profile.
Select the mail recipient(s) from the Mail To choices presented. Only
mail recipients that were previously configured are listed (see
Configure Mail Users on page 115).
Note: You must select autosupport@spectralogic.com as one of the
recipients if you want the library to send an AutoSupport
ticket request to Spectra Logic Technical Support.
Figure 192 Enter information about your operating
environment.
To Next Page
Loading...
