Spectra T200 - Page 389

Chapter 12 — Library Troubleshooting Accessing the Library Interior and Troubleshooting Blockages
December 2019 User Guide—Spectra T200, T380, and T680 Libraries
390
4. Using your fingers or a #2 Phillips screwdriver, loosen, but do not
remove, the two knurled screws securing the bottom of the library front
panel to the chassis.
5. Lift the front panel outward and away from the chassis to disengage the
two nuts on the back of the front panel from the holes on either side of
the chassis. Set the cover aside.
Figure 238 Removing the front panel screws.
Figure 239 Removing the front panel.
Knurled
screws
Alignment nut
on back side of
front panel
Chassis