Chapter 12 ā Library Troubleshooting Accessing the Library Interior and Troubleshooting Blockages
December 2019 User GuideāSpectra T200, T380, and T680 Libraries
391
Remove the Chamber Shelves
To access the transporter and drives inside the library, you must remove
any magazines that are stored in the chambers at the front of the library,
then remove the chamber shelves.
1. Using your fingers or a #2 Phillips screwdriver, loosen, but do not
remove, the knurled screw securing the fan assembly to the chassis.
2. Rotate the fan assembly toward the right and outward to remove it
from the chassis.
3. Remove any magazines that are stored in the chambers on all of the
exposed shelves.
Place covers on the magazines to protect the cartridges during the
replacement procedure.
Note: Do not remove or reposition cartridges in the TeraPack
magazines.
Figure 240 Removing the fan assembly.
To Next Page
Loading...
