SYNAPTICON SOMANET Node Series User Manual

1.2.6.2.2.3 Heat dissipation
For correct functioning, the servo drive must be installed on a sufficiently dimensioned heat conducting
surface made of a suitable material, such as aluminum.
Ensure that the servo drive is screwed properly to the heat conducting surface to facilitate the heat transfer.
That’s it! The next step is commissioning and tuning your drive:
Commissioning and tuning with OBLAC Drives
1.2.6.2.2.3.1 Downloads
DOWNLOAD 3D MODEL OF CIRCULO 7
DOWNLOAD 3D MODEL OF CIRCULO 9
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 182/887

SYNAPTICON SOMANET Node Series Specifications

General

Brand	SYNAPTICON
Model	SOMANET Node Series
Category	Servo Drives
Language	English