See details for Updating/downgrading OBLAC Drives.
2.2.2 User Interface Overview
2.2.2.1 Save to device
This operation will save all parameters to the config.csv file. When the device is power-cycled it will load this
file.
Note
When a parameter is entered, this change will be lost after power-cycling the device unless it is saved to
the device manually.
2.2.2.2 Update Firmware
When this button is clicked, a box appears listing the most recent firmwares available for your hardware.
The list is being filtered by the device hardware description and the running release of OBLAC Drives.
To Next Page
Loading...
Need help?
General
