SYNAPTICON SOMANET Node Series User Manual

2.7 Troubleshooting
This section shall guide you through the most common error scenarios that could occur when using OBLAC
Drives.
Important
Make always sure to carefully read through the setup instructions. A lot of issues can be avoided by
strictly following the instructions.
2.7.1 Virtualization not activated
If your computer does not have the virtualization technology activated, OBLAC Drives will most likely not work
correctly.
To fix that issue, you have to activate the virtualization technology of your processor (VT-x / AMD-V) in your
BIOS.
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 367/887

SYNAPTICON SOMANET Node Series Specifications

General

Brand	SYNAPTICON
Model	SOMANET Node Series
Category	Servo Drives
Language	English