Telit Wireless Solutions WE866E4-P - Page 111

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 111 2018-02-16
PRELIMINAR
Y
Response
Table 234, page 111, describes the responses and remarks for MQTT Publish command.
Table 233 MQTT Publish Parameters
Parameters Mandatory/Optional Value Description
CID Mandatory
Value range:0-15
Format: Integer
Default value:
N/A
It specifies the connection ID after MQTT
connect command.
QOS Mandatory
Value range:0-15
Format: Integer
Default value:
N/A
It specifies the level of assurance to
delivery the application message.
Retain Flag Mandatory
Value range:0,1
Format: Integer
Default value: 0
1- specifies the Server MUST store the
Application Message and its QoS, so that it
can be delivered to future subscribers
whose subscriptions match its topic name.
0- specifies, the Server MUST NOT store
the message and MUST NOT remove or
replace any existing retained message.
Message ID Mandatory
Value range:
0-65535
Format: Integer
Default value:
N/A
It specifies the ID of the message to be sent
along with message being published.
Topic Name Mandatory
Value range:
0-65535
Format: String
Default value:
N/A
It identifies the endpoint to which payload
data is published.
Data Mandatory
Value range:
0-1460
Format: Integer
Default value:
N/A
It specifies the length of the data.
Table 234 MQTT Publish Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.