Telit Wireless Solutions WE866E4-P - Page 134

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 134 2018-02-16
PRELIMINAR
Y
Response
Table 292, page 134, describes the responses and remarks for FWUP HTTP Client
command.
Synchronous Response
Table 293, page 135, describes the synchronous responses and remarks for FWUP HTTP
Client command.
Table 291 FWUP HTTP Client Parameters
Parameters Mandatory/Optional Value Description
Server
Address
Mandatory
Value range: 1-63
Format: String
Default value:
N/A
It specifies the HTTP server address or the
name.
Server Port Optional
Value range:
1-65535
Format: Integer
Default value: 80
It specifies the HTTP server port.
File URI Mandatory
Value range: N/A
Format: String
Default value:
ota.bin
it specifies the URI of the firmware file on
HTTP server.
SSL Flag Optional
Value range: 0,1
Format: Integer
Default value: 0
It specifies the SSL flag where,
0- is for HTTP
1- is for HTTPs
Time Out Optional
Value range:
1-1000000
Format: Integer
Default value: 100
It specifies the HTTP server time out
value.
Table 292 FWUP HTTP Client Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.