Telit Wireless Solutions WE866E4-P - Page 60

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 60 2018-02-16
PRELIMINAR
Y
Response
Table 101, page 60, describes the responses and remarks for Connection command.
Synchronous Response
Table 102, page 61, describes the synchronous responses and remarks for Connection
command.
Table 100 Connection Parameters
Parameters Mandatory/Optional Value Description
WHANDLE Mandatory
Value range: 0,1
Format: Integer
Default value: 0
It specifies the return value from
AT+WNI=0 command.
The user is required to be in Station mode
while issuing this command.
SSID Mandatory
Value range: 1-32
Format: String
Default value:
Telit_Guest
It specifies the SSID that has to be
connected.
The user required to provide the SSID of
the AP to be connected.
Passphrase Optional
Value range: 8-64
Format: String
Default value:
NULL
Unit: N/A
It specifies the passphrase required to
connect to a Network.
The user is required to connect to a
Network for a secured connection.
Channel Optional
Value range:
1-14,36,40,44,48,5
2,56,60,64,100,104
,108,112,116,132,1
36,140,149,153,15
7,161,165
Format: Integer
Default value: 6
Unit: N/A
It specifies the channel of an AP to
connect.
If channel is not mentioned then the
command scans all the channel to find an
AP to connect.
Table 101 Connection Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.