Telit Wireless Solutions WE866E4-P - Page 62

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 62 2018-02-16
PRELIMINAR
Y
Response
Table 104, page 62, describes the responses and remarks for Create Network command.
Synchronous Response
Table 105, page 62, describes the synchronous responses and remarks for Create Network
command.
Security
Type
Mandatory
Value range: 3-4
Format: String
Default value:
NONE
It specifies the security type provided for a
secured Network.
Security types are WEP, WPA and WPA2.
For an open security user has to give
NONE.
Encryption
Type
Mandatory
Value range: 3-4
Format: String
Default value:
NONE
It specifies the encryption type to be
provided for a secured Network.
Encryption Types are WEP, WPA and
WPA2.
For an open security user is required to has
to give NONE.
Passphrase Optional
Value range: 8-64
Format: String
Default value:
123456789
Unit: N/A
It specifies the passphrase required to
connect to a Network.
The user is required to connect to a
Network for a secured connection.
Table 103 Create Network Parameters
Parameters Mandatory/Optional Value Description
Table 104 Create Network Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.
Table 105 Create Network Synchronous Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.