Telit Wireless Solutions WE866E4-P - Page 80

WE866E4-P AT Commands Reference Guide
80572ST10887A Rev. 0.0 80 2018-02-16
PRELIMINAR
Y
Command Syntax AT+NDNSSDGETTARGETINFO=<Device ID>,<Instance Name>,[<IP Version>,<Time
Out>]
Parameter Description
Table 150, page 80, describes the NDNS Get Target Information parameters.
Response
Table 151, page 80, describes the responses and remarks for NDNS Get Target Information
command.
Synchronous Response
Table 152, page 81, describes the synchronous responses and remarks for NDNS Get
Target Information command.
Table 150 NDNS Get Target Information Parameters
Parameters Mandatory/Optional Value Description
Device ID Mandatory
Value range:0,1
Format: Integer
Default value: 0
It specifies the Device ID obtained during
WLAN NCM initiation.
Instance
Name
Mandatory
Value range:1-64
Format: String
Default value:
_Mydevice.tcp.loc
al
It specifies the name of the service to be
discovered.
IP Version Optional
Value range:
4,6,46
Format: Integer
Default value: 4
It specifies IP version to be used in
discovery.
Time Out Optional
Value range:
0-5000
Format: Integer
Default value:
5000
It specifies the no activity time for request
handling.
Table 151 NDNS Get Target Information Response
Responses Remarks
OK Success.
ERROR If parameter is not valid.