Xerox Wide Format 6705 System

2
Copy
2.13 [Copy (Manual Mode)] Screen
106
2.13.4 Original Type (Selecting the Document Type)
This function is equivalent to that displayed for [Original Type] on the [Image Quality] screen.
Refer

For more information, refer to "Original Type (Selecting the Document Type)" (p. 108).
2.13.5 Original Width (Scanning to Copy Documents in Maximum Width)
This function is equivalent to that displayed for [Original Width] on the [Layout Adjustment] screen.
Refer

For more information, refer to "Original Width (Scanning to Copy Documents in Maximum Width)" (p. 113).
2.13.6 Lighten / Darken (Adjusting Copy Density)
Copy density can be adjusted among nine levels. Move leftward to increase the density and rightward to decrease
the density.
Note

This function can also be set using [Lighten / Darken] on the [Advanced Settings] screen.
Steps
St
1.
Adjust copy density using [ ] and [ ].