219
7.3 Services Controlled by Authentication
7.3 Services Controlled by Authentication
This section describes the features that are controlled by the Authentication feature.
The restricted features vary depending on how the machine is used.
For information on restrictions applied folders when the Authentication feature is enabled, refer to "Folder
Authentication" (p. 220).
When [Login Type] is set to [Login to Local Accounts]
*1 Indicates whether authentication is required to use that service. "Yes" indicates authentication is required.
*2 Indicates the service can be restricted on a user basis. For more information, refer to "Create User Account" (p. 333).
When [Login Type] is set to [Login to Remote Accounts]
*1 Indicates whether authentication is required to use that service. "Yes" indicates authentication is required.
*2 The restriction is available on a feature basis if you are using Authentication Management as the authentication system. For
information on Authentication Management, refer to the documentation provided with the application.
*3 The remote authentication (Login to Remote Accounts) cannot be used to prohibit the Print feature from being used. In order to
restrict the use of the Print feature, you need to use Private Charge Print.
Service
Authentication
*1
User based access control
*2
User ID
Copy Yes Yes
Print Yes Yes
Scan Yes Yes
Service
Authentication
*1
User based access control
*2
User ID
Copy Yes Yes
Print No
Yes
*3
Scan Yes Yes
To Next Page
Loading...
Need help?
General