Xerox Wide Format 6705 System

9
System Settings
9.4 Copy Service Settings
308
9.4.8 Detailed Settings
Steps
St
1.
Press [Detailed Settings].
2.
Fill in [Item Number] and press [Confirm / Change].
Refer

For information on the item numbers, refer to
"Item Number: Copy Service Settings" (p. 308).
3.
Fill in [New Value].
4.
Press [Confirm / Change].
Item Number: Copy Service Settings
Item
Number
Description New Value Factory Default
30
Sets the tray for banner sheets. 1: Roll 1
2: Roll 2
1: Roll 1
31
Sets the paper length of a banner sheet. 210-2500 (mm) 210 (mm)
70
Sets the default value for the unevenness level
used for [Uneven-Toned Background].
1-80 20
80
Sets the default value for [Scan Start Position]
under [Sample Copy].
0-1200 (mm) 0
81
Sets the default value for [Measurement] under
[Sample Copy].
50-200 (mm) 50