Xerox Wide Format 6705 System

Authentication
7
233
7.6 Enabling Remote Authentication
7.6 Enabling Remote Authentication
This section describes how to make settings to use the machine with remote authentication.
Refer to these subsections for more information on each step.
 Set the Authentication Method to "Login to Remote Accounts"........................................................................................p. 233
 Setting Access Restriction...................................................................................................................................................................p. 235
 Configuring the Authentication Server.........................................................................................................................................p. 236
7.6.1 Set the Authentication Method to "Login to Remote Accounts"
To use the machine with remote authentication, set the authentication method to "Login to Remote Accounts".
Important

Any user information and personal folders registered on the machine will be deleted If you change
authentication method from "Login to Local Accounts" to "Login to Remote Accounts".
Steps
St
1.
Press the <Log In/Out> button on the control panel.
2.
Enter the User ID of the system administrator, by using
the numeric keypad or the keyboard displayed on the
screen, and press [Enter].
Note

By factory default, the User ID is "11111".
123
456
789
0
＃
C
Services Home
Copy (Not In Use) Review
Job Status
Machine Status
Dial Pause Speed Dial
ABC DEF
GHI JKL MNO
PQRS TU V WXYZ
Interrupt
Start
Stop
Clear All
Log In / Out
Energy Saver
<Log In / Out> button