Xerox Wide Format 6705 System User Manual

Scan
3
145
3.8 [Scan to PC] Screen
3.8 [Scan to PC] Screen
This section describes how to select functions on the [Scan to PC] screen. These functions allows you to store
scanned data on a network-connected computer (server).
Refer

To use the Scan to PC feature, you must first set up your network. For information on how to configure network
settings, refer to "Setting Up the Scan to PC Feature" (p. 211).

The destination server (PC Save Address) must be registered before running a scan job. For information on how
to register a server, refer to "Server (PC Save Address)" (p. 203).
The following describes the [Scan to PC] screen. Refer to the following subsections for more information on each
item:
 Server Save Destination (Specifying the Save Destination PC) ..........................................................................................p. 146
 Browse (Browsing Network PCs and Folders to Specify Save Destination) ....................................................................p. 147
Steps
St
1.
On the menu screen, press [Scan to PC].
2.
Select the desired function on the [Scan to PC] screen.
Note

The following functions are equivalent to those
displayed on the [Store to Folder] screen. For
information on how to do this, refer to "[Store to
Folder] Screen" (p. 135).

Color Scanning Mode

Resolution

Original Type

Output File Format

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English