Xerox Wide Format 6705 System

Copy
2
85
2.4 Making Adjustments to Color on the Original
2.4.2 Eliminating the Specified Color on the Original (Disabling Color)
When copying a color document, this feature allows you to make a copy leaving out those parts that correspond to a
specified color.
Steps
St
1.
On the menu screen, press [Copy].
2.
Press the [Image Quality] tab.
3.
Press [Adjust Color Density].
4.
Select the [Adjust] check box.
5.
Select the check box for a color to eliminate the color
from being copied.
6.
Set other features as necessary.
7.
Enter the number of copies using the numeric keypad.
8.
Load the document.