Xerox Wide Format 6705 System User Manual

5
Computer Operations
5.3 Printing
178
2.
Check that the LPD port is set to [Enabled].
Refer

For information on how to set the LPD port, refer to "Port Settings" (p. 310).
3.
Set the IP address.
You can skip this step when the machine is already assigned an IP address.
Refer

For information on how to assign an IP address to the machine, refer to "Protocol Settings" (p. 311).
4.
Press [Close] several times until the [Tools] screen is displayed.
5.
Press [Close].
Note

Rebooting the machine may be required depending on the settings. When a message displayed on the
screen, follow the message and reboot the machine.
6.
Configure other LPD settings as necessary.
Step 3 Setting on your computer
Before you can print on the machine from your computer, you need to install the print driver and the required
applications on your computer.
Refer

Print drivers are available on xerox.com.

For information on how to install BT-PlotAssistant, refer to "BT-PlotAssistant User Guide".
5.3.4 Printing Using the Print Driver
The following describes how to print using the print driver.
The print procedure varies depending on the application being used. For details, refer to the documentation for your
application.
The following describes as an example how to print from Windows WordPad.
Refer

For information on the Print features, refer to the print driver help that is displayed when you click [Help] on the
print driver screen.
Steps
St
1.
From the [File] menu of your application, select [Print].
2.
Select [Xerox Wide Format 6705 System], and click [Preferences] as necessary.

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English