Xerox Wide Format 6705 System

System Settings
9
317
9.5 Connectivity & Network Setup
9.5.5 Detailed Settings
Steps
St
1.
Press [Detailed Settings].
2.
Fill in [Item Number] and press [Confirm / Change].
Refer

For information on the item numbers, refer to
"Item Number: Connectivity & Network Setup"
(p. 317).
3.
Fill in [New Value].
4.
Press [Confirm / Change].
Item Number: Connectivity & Network Setup
Item
Number
Description New Value Factory Default
0
Sets whether to validate users in Active
Directory.
0: Do not validate
1: Validate
0: Do not validate