Xerox Wide Format 6705 System

4
Stored Programming
4.2 Registering/Deleting/Changing a Stored Program
166
4.
Select a number to register a stored program.
Note

Press [ ] to display the previous screen, and
press [ ] to display the next screen.

If you want to display a specific stored program
number at the top, enter that number in [Go
to].
5.
Press [Register].
6.
Select a function to register to the stored program.
Note

To cancel the registration, press the <Stop>
button.
7.
Press the <Start> button.
Note

If no name is specified, the program is
displayed as "(No Name)".
Refer

For information on how to name the stored
program you have registered, refer to
"Registering/Changing the Name for a Stored
Program" (p. 167).
4.2.2 Deleting a Stored Program
The following describes how to delete a registered stored program.
Steps
St
1.
Select a number to delete the stored program.
Note

Press [ ] to display the previous screen, and
press [ ] to display the next screen.

If you want to display a specific stored program
number at the top, enter that number in [Go
to].
2.
Press [Delete].