Xerox Wide Format 6705 System

Authentication
7
237
7.6 Enabling Remote Authentication
3.
Fill in the [User ID] and [Password] fields, and click [Login].
Note

By factory default, the User ID is "11111", and the password is "x-admin".
4.
Set up the authentication server.
Refer to the following setup procedures:
 Authentication Policy ...........................................................................................................................................................................p. 237
 Authentication System........................................................................................................................................................................p. 238
 LDAP Server / Directory Service........................................................................................................................................................p. 238
 LDAP Authentication............................................................................................................................................................................p. 239
 Custom Filters..........................................................................................................................................................................................p. 239
 SSL / TLS Settings ..................................................................................................................................................................................p. 240
Authentication Policy
(1)
Select [Properties] > [Security] > [Authentication] > [Authentication Policy].
(2) Select [Login to Remote Accounts] for [Authentication Settings].
(3) Set each of the other items indicated in the rectangle in the figure below.
(4) Click [Apply].