Xerox Wide Format 6705 System User Manual

6
Configuration
6.3 Scanner Environment Settings
210
6.3 Scanner Environment Settings
This section describes how to configure the environment for using the machine's Scan feature.
6.3.1 Setting Up the Store to Folder Feature
The following describes how to set up the Store to Folder feature. Refer to these subsections for more information on
each step.
 Step 1 Configuring TCP/IP .................................................................................................................................................................p. 210
 Step 2 Registering a folder.................................................................................................................................................................p. 210
 Step 3 Setting on your computer ....................................................................................................................................................p. 210
Step 1 Configuring TCP/IP
To use the scanner driver (to connect to network) provided by Xerox, the machine's IP address must be configured.
Note

You can skip this step when the machine is already assigned an IP address.
Refer

For information on how to assign an IP address to the machine, refer to "Setting the IP Address" (p. 209).
Step 2 Registering a folder
Register a folder to store scanned data.
Refer

For information on how to register a folder, refer to "Create Folder" (p. 201).
Step 3 Setting on your computer
When using the scanner driver (to connect to network), it must be installed on the computer.
Refer

The scanner driver (to connect to network) is available on xerox.com.
For information on how to install the driver, refer to the Help section included with the driver.

When using the scanner driver (to connect to network), refer to "Computer Operations" (p. 169).

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English