Xerox Wide Format 6705 System User Manual

Copy
2
95
2.10 Copying from Memory
2.10 Copying from Memory
The Copy from Memory function allows you make additional copies of the last copied document without reloading.
When you have selected [Collated] for the last copy job, the same collated set of the document will be additionally
output.
The Copy from Memory function is disabled if:
 You press the <Clear All> button or the machine enters the Auto Reset state.
 You turn the power off or the machine enters the Energy Saver mode.
 You load the next document.
 You return the screen to the [Services Home] screen.
 You run an Interrupt copy.
 You pull out the card (DocuLyzer).
 You log out of the authenticated mode.
The Copy from Memory function cannot be used when:
 Image data for the last document has been lost due to a problem such as a paper jam.
Important

The following functions cannot be used in conjunction with the Copy from Memory function.
- The custom buttons on the control panel (Calling the associated feature)
- Interrupt Copy
- Sample Copy
- Adjust Color Density
- Original Scanning Speed
-Copy Output
Note

The Color Board & Page Memory for IIT is required to use this feature.
Steps
St
1.
After running a copy job, press [Copy from Memory].

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English