Xerox Wide Format 6705 System

7
Authentication
7.6 Enabling Remote Authentication
238
Authentication System
(1)
Select [Properties] > [Security] > [Remote Authentication Servers] > [Authentication System].
(2) Select [LDAP] for [Authentication System].
(3) Set each of other items indicated in the rectangle in the figure below.
(4) Click [Apply].
LDAP Server / Directory Service
(1)
Select [Properties] > [Network Settings] > [Protocol Settings] > [LDAP] > [LDAP Server].
(2) Set each of items indicated in the rectangle in the figure below.
(3) Click [Apply].