Xerox Wide Format 6705 System User Manual

9
System Settings
9.4 Copy Service Settings
302
9.4.1 Copy Tab - Features Allocation
You can use this feature to customize the functions shown to the right on the [Copy (Manual Mode)] screen. Setting
the frequently used functions enables you to avoid extra operations such as selecting tabs.
Steps
St
1.
Press [Copy Tab - Features Allocation].
2.
Set each item as necessary, and click [Close].
Frequently Used Features 1, 2
Allows you to set the functions shown to the right on the [Copy
(Manual Mode)] screen.
Select from [Original Type], [Image Options], [Background
Suppression], [Threshold Sort], [Adjust Color Density], [Original
Width], [Image Shift], [Scan Start Position], [Edge Erase], [Invert
Image], [Scan Speed], [Image Rotation], [Copy Output], [Lead &
Tail Margins], and [Sample Copy].
The factory defaults for Frequently Used Features 1 and 2 are [Original Type] and [Original Width], respectively.
9.4.2 Preset Buttons
You can use this feature to set the magnification ratios shown on the [Copy (Manual Mode)] screen.
Steps
St
1.
Press [Preset Buttons].
2.
Set each item as necessary, and click [Close].
Reduce / Enlarge Buttons 3 to 5
Allows you to set the magnification ratio displayed in the third to
fifth buttons in [Reduce/ Enlarge] on the [Copy (Manual Mode)]
screen.
Select from [25.0%], [35.3%], [50.0%], [70.7%], [141.4%],
[200.0%], [283.0%], and [400.0%].
The factory defaults are:

Reduce / Enlarge Button 3: 50.0%

Reduce / Enlarge Button 4: 70.7%

Reduce / Enlarge Button 5: 141.4%

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English