Xerox Wide Format 6705 System

Scan
3
149
3.9 [Multi Send Scan] Screen
3.9.1 Multi Send Address (Specifying the Destination)
The following describes how to specify a multiple destination address to which to send scanned data.
Steps
St
1.
Press [Multi Send Address].
2.
Select a group as the multiple destination address, and
press [Change Settings].
Note

Only the numbers that are registered can be
selected.

Press [ ] to display the previous screen, and
press [ ] to display the next screen.

If you want to display a specific group at the
top, enter that number in [Go to].
3.
Select the desired option.
Send Address
The list of destination addresses in the group is displayed,
where you can select one or more addresses to exclude them
temporarily from the destination.
Note

The destination can include up to two servers,
five printers, and one local printer (this
machine).