3.8 [Scan to PC] Screen
146
3.8.1 Server Save Destination (Specifying the Save Destination PC)
The following describes how to specify the server on which to save scanned data.
1.
Press [Server Save Destination].
2.
Press [Preset Server].
3.
Select the number corresponding to the destination
server.
Only the numbers that are registered can be
selected.
Press [ ] to display the previous screen, and
press [ ] to display the next screen.
If you want to display a specific save
destination server at the top, enter that number
in [Go to].
4.
Press [Save].
The machine checks the connection with the
destination.
If the machine fails to establish a connection with the destination, an error message is displayed. In that
case, press [Confirm], and verify the settings.
To Next Page
Loading...
Need help?
General