9.9 Authentication / Security Settings
330
9.9 Authentication / Security Settings
With [Authentication / Security Settings], you can configure the machine's security settings.
Refer to these subsections for more information on each setting.
System Administrator Settings.........................................................................................................................................................p. 330
Authentication ........................................................................................................................................................................................p. 332
Job Status Default .................................................................................................................................................................................p. 338
Overwrite Hard Disk ..............................................................................................................................................................................p. 339
Detailed Settings....................................................................................................................................................................................p. 341
1.
On the [Tools] screen, press [Authentication / Security
Settings].
For information on how to display the [Tools]
screen, refer to "System Settings Procedure" (p.
282).
2.
Select the item you want to configure or change.
9.9.1 System Administrator Settings
In [System Administrator Settings], you can set the system administrator's login ID and password.
We recommend that you change the default ID and password for the system administrator to prevent unauthorized
users from changing the machine settings and to enhance security.
System Administrator's Login ID
Allows you to set the system administrator's User ID. The user ID can be 1 to 32 single-byte characters.
The factory default is "11111".
To Next Page
Loading...
Need help?
General