Xerox Wide Format 6705 System User Manual

Problem Solving
8
257
8.6 Problems during Scanning
8.6.3 Unable to Send Scanned Data over the Network (SMB/LPR)
If you cannot send scanned data over the network, identify the symptom in the following table to perform the
corresponding remedy.
Symptom Check Remedy
Unable to send
data over the
network.
Is the server specified correctly? Correctly specify the server.
Is the save destination specified
correctly?
Correctly specify the save destination.
Is the shared name specified
correctly?
Correctly specify the shared name.
Is the login name specified
correctly?
Correctly specify the login name.
Is the password specified
correctly?
Correctly specify the password.
Are you attempting SMB data
transfer with a user account for
which no password has been set,
on a computer running Windows
Server 2003, Windows Server
2008, or Windows XP?
Follow the steps below to change the settings of network access:
1. Start Windows, and select [Control Panel] > [Administrative
Tools] > [Local Security Policy].
2. Select [Security Settings] > [Local Policies] > [Security
Options].
3. Change [Accounts: Limit local account use of blank
passwords to console logon only] to [Disabled].
Is the network communication
blocked by firewall protection?
Make sure the firewall settings are correct.
Refer

Refer to "Configuring Windows Firewall" (p. 213).
Are the access permissions
assigned to the destination
shared folder to which you are
attempting SMB data transfer
correct?
Make sure the settings for the shared folder are correct.
Refer

Refer to "Setting Up the Shared Folder" (p. 211).

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English