Xerox Wide Format 6705 System

System Settings
9
321
9.6 Scan Service Settings
9.6.3 Other Settings
Steps
St
1.
Press [Other Settings].
2.
Set each item as necessary, and click [Close].
TIFF Format
Allows you to set the TIFF (JPEG compression ) format displayed
for [File Format] on the [Scan Job] screen.
You can select [TIFF V6] or [TTN2] according to the scanning
software you use. The factory default is [TIFF V6].
Multi Send Printer Transfer Format
Allows you to set the output file format applied when [Output Color] is set to [Color] or [Grayscale] on the [Multi
Send Scan] screen and a printer is selected as the send destination.
Select [TIFF] or [JPEG]. The factory default is [TIFF].