Safety Notes
20
Locate this product in a well-ventilated area. Do not obstruct ventilation openings of the product.
Keep the minimum clearance as follows for ventilation and an access to the power plug. Unplug the
product if an abnormal condition is noted.
Do not incline the product at more than 10 degree angle. Otherwise, it may fall over and cause injuries.
Always lock the wheels of this product after installation. Otherwise, it may fall over or slide and cause
injuries.
When moving this product, always switch off and unplug it. Otherwise, a power cord may be cracked and
overheated, and eventually may cause electric shock and a fire accident.
To keep this product in a good performance and condition, always use it in the following environment:
Temperature: 10 - 32 °C
Humidity: 15 - 85 %
The humidity should be 47.5 % or less at a temperature of 32 °C; the temperature should be 27.8 °C or
less at a humidity of 85 %.
When the product is left in a chilly room and the room is rapidly warmed up by heater, dew condensation
may form inside the product and cause a partial deletion on printing.
For measures to prevent the machine from moving and overturning in case of earthquake, please consult
with your local Xerox representative.
650mm
600mm
800mm
800mm
2760mm
2110mm
10
10
To Next Page
Loading...
Need help?
General