Xerox Wide Format 6705 System User Manual

Problem Solving
8
263
8.9 Error Messages
Status Cause Remedy
Scanned data is not sent to
the save destination
although no error message is
displayed.
After you press the <Job
Status> button on the control
panel, the status "Completed
-Error" is displayed for the
Scan to PC or Multi Send Scan
job.
A submission error occurred during a Scan to
PC or Multi Send Scan job.

Write permissions are not enabled on the
save destination.

Insufficient storage space of the save
destination.

Failed to write to the destination disk.

Other failures such as a communication
error (including LAN failure such as
disconnection and bad connection of cables,
disk error).

Clear the causes shown to the left, and
run the scan job again.

Xerox Wide Format 6705 System Specifications

General

Brand	Xerox
Model	Wide Format 6705 System
Category	Printer
Language	English